The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares V7 Sport 750S S3 850T Clutch

Sort by Title

Sort by Price

Page 2 of 3

1 2 3

Clutch Intermediate Plate

CLA12300 Fits 750S, S3, V7 Sport, V7 Special (1969-1971), V7 700, 850 GT, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, V11 Sport ALL, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Breva 1200 (2v/cyl), Griso 850, Griso 1100, Norge 1200 (2v/cyl)

Steel intermediate clutch plate

part in stock 2 in stock

12082300-z 12082300 GU12082300 12 08 23 00
1208 2300 1208.2300 12.08.23.00

£28.00

INC VAT

£23.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Friction Plate Original Type

CLA28460 Fits 750S, S3, V7 Sport, V7 Special (1969-1971), V7 700, 850 GT, T3, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, G5, T4, SP II, Cali 2, Le Mans 1000 (to engine VV016375), Mille GT (to engine VT024596), Cali 3 (to engine VT032542)

Dimensions:
Spline depth approx. 3mm

Original type clutch friction plate for big twins

2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub. Also known as Guzzi ref. 12084400

part in stock 2 in stock

28084460-z 28084460 GU28084460 28 08 44 60
2808 4460 2808.4460 28.08.44.60

£52.00

INC VAT

£43.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Lever Pivot Pin

CLA95271 Fits 750S, V7 Sport, S3, 850/1000 ALL Models, 1100 Sport ALL, Breva 750, Cali 1100 (1994-1997), Cali EV, Nevada 750, Quota 1100, V35, V50, V65, V75 (4 valves per cylinder), V7 Classic, V7 Sport, 850 GT, Centauro, Daytona, V9 ALL

Dimensions:
7mm OD x 39mm

External clutch operating lever pivot for gearbox end cover

Superceded to Guzzi ref. 2A000384

part in stock 1 in stock

95780271 GU95780271 95 78 02 71
9578 0271 9578.0271 95.78.02.71

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Kit Updated Splined Centre

CLA20302 Fits 850 GT, V7 Sport, S3, 750S, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, Centauro, Daytona

Clutch plate kit consisting of 2 x friction plates, 1 x intermediate plate, deep splined clutch centre / boss and tabbed lock washer (not shown). For models with the early type shallow spline plates this is a worthwhile upgrade kit to the better deep splined centre and plates. Clutch plate alignment tool also available, see TOA30510. Suitable for all 5 speed dual plate clutch models

Save £20 on the cost of these components if bought seperately. Does not include clutch springs (see CLA13100). Thicker side of each friction plate should face transmission

part in stock 1 in stock

£186.50

INC VAT

£155.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centre Nut Tool

TOA14651 Fits V7 Sport, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL

Tool for clutch centre gear nut

Half inch socket drive. This is a cheaper aftermarket tool- see TOA14903 for original factory item

part in stock 1 in stock

14912603 GU14912603 14 91 26 03
1491 2603 1491.2603 14.91.26.03

£39.00

INC VAT

£32.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Cable

CAA17002 Fits 850T, 750S

Dimensions:
outer 1295mm excluding adjuster, inner 1425mm

Clutch cable with adjuster for gearbox end

Note this cable only has a barrel nipple at the gearbox end of the cable

part in stock 1 in stock

17093002 GU17093002 17 09 30 02
1709 3002 1709.3002 17.09.30.02

£17.10

INC VAT

£14.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Friction Plate Original Type Newfren

CLA28461 Fits 750S, S3, V7 Sport, V7 Special (1969-1971), V7 700, 850 GT, T3, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, G5, T4, SP II, Cali 2, Le Mans 1000 (to engine VV016375), Mille GT (to engine VT024596), Cali 3 (to engine VT032542)

Shallow splined Newfren clutch friction plate for big twins with old shallow splined clutch centre

This part is available by special order, request a quote

28084460-z 28084460 GU28084460 28 08 44 60
2808 4460 2808.4460 28.08.44.60

£58.00

INC VAT

£48.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Gear Nut

CLA93022 Fits 750S, V7 Sport, S3, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL

Dimensions:
21mm ID

Nut for clutch centre gear CLA30810, fits on gearbox input shaft

See TOA14903 for special tool

This part is due back in stock soon, call 01484 841395 to reserve yours

93601022-z 93601022 GU93601022 93 60 10 22
9360 1022 9360.1022 93.60.10.22

£10.00

INC VAT

£8.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Release Bearing

CLA12002 Fits 750S, V7 Sport, S3, 850/1000 ALL Models, V7 700, V7 Special (1969-1971), 850 GT, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, V11 Sport ALL, Griso 1100, Griso 850, Breva 1200, Breva 1100, Bellagio, Breva 850, Cali Vintage, Norge ALL, V35 ALL, V50 ALL, V65 ALL, V75 ALL, V7 Classic, V7 Special, V7 Cafe, V7 II ALL, V7 III ALL, V9 ALL, Nevada ALL, Centauro, Daytona

Dimensions:
22mm OD

Clutch thrust bearing complete, sits in recess in rear gearbox casing.

This bearing is the higher quality OE bearing used on recent models

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

2A000376

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brembo Handlebar Master Cylinder PS13

CLA03145 Fits V7 Sport, S3, 750S, 850/1000 ALL Models, Cali 1100, Cali EV, Cali Stone, Cali Jackal, 1100 Sport ALL, Daytona, Centauro

Brembo PS 13 handlebar mounted clutch master cylinder, supplied complete with lever.

This part is available by special order, request a quote

£175.00

INC VAT

£145.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 3

1 2 3